Samsung SGH-I927ZKAATT User Manual
Page 98
93
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
1.
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings.
2.
Tap WPS button connection.
3.
Press the WPS button on your Wi-Fi access point within 2
minutes.
Auto Connect to AT&T Wi-Fi Hotspots
With the Auto Connect feature, you can set up your phone to
automatically connect to AT&T Wi-Fi Hotspots as soon as they are
detected.
1.
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings.
2.
Tap Auto connect to make a checkmark and activate the
feature.
Activating Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
1.
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Wi-Fi Direct settings.
2.
Tap Wi-Fi Direct. A check mark displayed indicates Wi-Fi
Direct is active. For more information, refer to “Wi-Fi
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
ᮣ
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Bluetooth settings and tap Bluetooth to turn
it on.