Samsung SGH-I927ZKAATT - Manual (Page 131)

Connections 126
3. Enter a wireless password if necessary.
Manually add your new network connection
1. Tap Add Wi-Fi network.
2. Enter the Network SSID. This is the name of your Wireless
Access Point.
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
4. If secured, you will also need to enter your WAP’s
password.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Press ➔ Scan.
3. e new information and connect to your target WAP.
Note: The next time your device connects to a previously accessed or
secured wireless network, you are not prompted to enter the WAP key
again, unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Tap the Wi-Fi field to deactivate the feature. The green
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Press ➔ Scan.
Auto Connect to AT&T Wi-Fi Hotspots
With the Auto Connect feature, you can set up your phone to
automatically connect to AT&T Wi-Fi Hotspots as soon as they are
detected.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Tap Auto connect to make a checkmark and activate the
feature.