Triton TargetPro - Manual (Page 73)

June 2004 TargetPro™ User's Manual
All information that may be present in the Tag 270 will be populated in the
appropriate fields shown in Figure 30.
Moreover, you can manually edit the text information that appears in the Full
Contents of TAG270 at the bottom of the dialog box. (Figure 30 shows an
example of this; the modified area has been identified by a rectangle around
it.) However, manually editing this area does not modify the TAG270 file,
even if it’s resaved in TargetPro.
In addition, the TAG270 Information dialog box has an Audit Trail button for
displaying any enhancements to the image that may have been done in the
ELT in this or any other session.
As such, it’s a superset of all TargetPro enhancements ever done to the file
so long as:
• the file has Tag 270 information in it, and
• the Automatic Audit Trail box (Tools Configuration shown in the section
‘Configuring to Display Data’ (starting on page 62)) was enabled before
enhancements were performed.
Thus, the audit trail in the ELT may or may not correspond to the audit trail
information shown in the TAG270 Audit Trail information window. Figure 31
shows an example of the TAG270 Audit Trail information window.
Chapter 5: TargetPro Menu 62