Triton TargetPro - Manual (Page 17)

June 2004 TargetPro™ User's Manual
Chapter 2: Using TargetPro
If you’ve installed the TargetPro software and have it running, you can use it to
open CON (contact) or TGT (target) fields, enhance them, and save the changed
files. This chapter explains how to do that.
You can then save these small images as files independent of the original data
imagery. You can then recall the image in Isis without having to playback the
entire data imagery that contained the selected image – or you can have Isis
playback the image in the larger context of your data imagery, in case you want
to see the area surrounding the selected image.
2.1 Running TargetPro
You can run TargetPro in a number of ways, shown next. Choose a convenient
method.
To run TargetPro, double-click on the TargetPro icon in the Triton group
(Microsoft Windows), or
• From Isis, configure for TargetPro availability (Tools → Target Setup…),
and then double-click the left trackball button while imagery is scrolling in an
Isis waterfall window to put a contact in the TargetPro working window.
TargetPro runs and displays its initial screen (Figure 3). Moreover, if you have
run TargetPro before, TargetPro remember the overall size and position of the
application window as it was when you last used it.
Chapter 2: Using TargetPro 8