Vaisala Hydromet Data Collection Platform - Manual (Page 149)

Chapter 5 ________________________________________ Advanced Use of Lizard Setup Software
VAISALA______________________________________________________________________ 147
In addition to being provided by the user, certain network parameters,
such as IP addresses and subnetwork masks, may be configured so that
they are automatically provided by the network.
Parameter Set Management In Lizard
The parameter set for a certain component or functionality is usually
managed in the corresponding configuration view. In addition to this,
Lizard provides a common configuration view for all parameter sets. To
access this view, shown in
Figure 69 on page 147 , select Parameter
Sets from the Setup menu.
0711-086 Figure 69 Parameter Sets Window
To access the parameters for a certain set, select the set from the list on
left side of the view. The content of the list can be filtered by selecting
a different category from the pull-down menu above the list.
To add a parameter to a set, proceed as follows:
1. Click Add.
2. Give the parameter a name and click OK.
3. Enter a description for the parameter by double clicking its
Description field.
4. Select a data type for the parameter. The available options are
Text, Boolean, Number (float), and Number (int) for character
NOTE Do not remove or rename any of the preconfigured parameters unless
specifically instructed to do so. The affected components will most
likely stop from functioning if the required parameters are not present.