Ag Leader EZ-Guide 250 Getting Started Guide - Manual (Page 72)

A message appears to warn that you will load the configuration over the current configuration. Press
to proceed, or press the function button to exit without loading.
Summary Report
The lightbar can produce multi−page field summaries that contain a field map and report.
These summaries are in RTF format and can be viewed on an office computer. The summary report is
automatically created when you close the field. (A field is closed when you run the New Field Wizard). The
summary report has the same name as the field.
Note: To view the graphics in the files, you may need to install the Microsoft® Word viewer utility from the
EZ−Guide 250 Documentation CD.
The summary shows the current implement width. If you create a summary of a field that was driven with an
implement of a different width, change the current implement width to match that of the field before you
continue.
Note: A field must contain converage for you to be able to generate a summary report.
To manually create a field summary:
Open the appropriate field. 1.
From the main guidance screen, press one or more times until you have selected . 2.
Press . The Configuration screen appears. 3.
From the Configuration screen, select Data Management / Summary Reports. The Summary Reports
screen appears. 4.
Select Create Summary Report Now and then press . The summary report is saved to the lightbar's
internal memory.
5.
68