Ag Leader EZ-Guide 250 Getting Started Guide - Manual (Page 68)

Connect the USB drive. See USB Compatibility 1.
Select Configuration / Data Management / Manage Fields / Get Fields from USB. 2.
Do one of the following: 3.
Select the specific client, farm, and field to import.
♦
Select All to get all of the data in a category to the USB drive.
♦
Note: If you select All, you do not need to select the later options.
Select Import Files and then press . A warning message appears. 4.
Press to continue. A screen with an hourglass appears. 5.
The files are imported from the USB drive.
Importing Data from the AgGPS FieldManager Display
The AgGPS FieldManager display uses a CompactFlash card to record field data. The EZ−Guide 250 system uses
a USB drive. Therefore, the storage devices are not interchangeable.
To import data from the AgGPS FieldManager display to the EZ−Guide 250 system:
Insert the FieldManager display data card into the card reader of your office computer. 1.
Copy the field data to a temporary directory on the computer. 2.
Insert the EZ−Guide 250 system USB drive into the office computer. 3.
Copy the field data from the temporary directory to the USB drive. 4.
Insert the USB drive into the lightbar. 5.
On the lightbar, select Configuration / Data Management / Manage Fields / Get Fields from USB. 6.
You cannot import old field data into the EZ−Guide 250 system from the AgGPS 170 Field Computer or an RDL.
Sending Data to the USB Drive
You can export data to a USB drive. This can be useful for backing up your data, or viewing the data in a GIS
software application.
Note: The lightbar will not send data to a USB drive that is over 90% full.
Connect the USB drive. See USB Compatibility 1.
Select Configuration / Data Management / Manage Fields / Send Fields to USB. The Send Fields to USB
screen appears: 2.
64