Ag Leader EZ-Guide 250 Getting Started Guide - Manual (Page 54)

Select one of the following: 3.
ITEM DESCRIPTION
Cancel Exit without moving the guidance line
Shift but Don't
Save The line moves to your current location, but when you exit the field the previous line
position is retained
Shift and Save
New
The line moves to your current position and is permanently saved in the new location
Configuring the Lightbar
Setting the LED brightness
You can adjust the brightness of the LEDs on the lightbar. In bright sunlight, increase the brightness to make the
LEDs more obvious. In darker conditions, for example, driving at dusk, you can lower the brightness settings to
make the LEDs less intense.
To change the LED brightness, select Configuration / System / Display / LED Brightness.
Setting the backlight brightness
The backlight brightness controls the brightness of the lightbar screen.
To adjust the setting, select Configuration / System / Display / Backlight.
Setting the information tab transparency
For a description of the information tabs, see Information tabs.
The information tabs are transparent. To change the level of transparency, select Configuration / System / Display
/ Status Popup Transparency.
10 represents a solid black tab; 1 is barely visible.
Setting the LED mode
There are two LED modes:
50