Introduction, Standard features of the gps 5100 receiver – Ag Leader GPS 5100 User Guide User Manual
Page 10
2 Overview
4 GPS 5100 Receiver User Guide
2.1
Introduction
This chapter describes the GPS 5100 receiver and gives an overview of
GPS, DGPS, and related information. When used with a Real-Time
Kinematic (RTK) base station, the GPS 5100 receiver provides RTK
positioning for high-accuracy, centimeter-level applications. For
physical specifications, see Appendix A, Specifications.
2.2
Standard Features of the GPS 5100 Receiver
A standard GPS 5100 receiver provides the following features:
•
12 GPS (C/A-code) tracking channels, code carrier channels
•
Horizontal RTK positioning accuracy 2.5 cm (0.98 in) + 2 ppm,
2 sigma; vertical RTK positioning accuracy 3.7 cm (1.46 in)
+ 2 ppm, 2 sigma
•
Submeter differential accuracy (RMS), assuming at least five
satellites and a PDOP of less than four
•
Combined GPS/DGPS receiver and antenna
•
System level cable
•
AgRemote
utility with four-button keypad to configure and view
system properties (download from the Ag Leader website at
•
LED status indicator
•
The receiver outputs a 1 PPS (pulse per second) strobe signal on
both ports. This signal enables an external instrument to
synchronize its internal time with a time derived from the very
accurate GPS system time.
•
WAAS differential correction compatibility
•
Field computer compatibility
•
EVEREST™ multipath rejection technology
•
OmniSTAR VBS and HP positioning compatibility