beautypg.com

HP Netserver L Server series User Manual

Page 8

background image

Chapter 1

Controls, Ports and Indicators

2

Table 1-1. Control Panel Switches and Indicators

Control/Indicator

Description

Power On/Off/Sleep
Switch & LED

Power
Switch

Power
LED

The power switch turns the Netserver power On or Off. If
sleep states are available, it also transitions between Power
On and sleep states.

Sleep states are NOS dependent and only available if your
NOS supports power management based on the ACPI
(Advanced Configuration and Power Interface) standard.
Refer to “Applying Power to the HP Netserver” and
“Sleep States (ACPI)” later in this chapter.

The LED indicates the power state of the Netserver:

Steady Green indicates the Netserver is operating

normally.

Blinking Green indicates the Netserver is in a sleep

state and under ACPI control.

Off (unlit) indicates the Netserver is powered off or

in standby mode.

Reset Switch

RESET

This switch creates a hard system reset, which is
equivalent to a power-on reset.