HP Netserver L Server series - Manual (Page 107)

Chapter 12 Troubleshooting
101
9. Make any configuration changes required.
10. Choose the Exit option and save the changes to save the configuration and
exit the Setup Utility.
Configuration Switch
Spring Latch
Battery
Switch 1 Position
(Back of Chassis)
Figure 12-1. Configuration Switch Location
Clear CMOS
Clear Password
O
pen
Shaded rectangle
represents the position
of switch.
Open = Off Closed = On
Not Used (Default = Off)
Not Used (Default = Off)
(Back of Chassis)
Figure 12-2. Configuration Switch Positions