HP Netserver L Server series - Manual (Page 49)

Chapter 5 Installing Additional Boards
43
10. Replace the top cover on the HP Netserver and push the Netserver back
into the rack.
Once the HP Netserver is returned to normal operation, you may need to
install software drivers.
The drivers for the new PCI board are either part of your existing system
software or included on a flexible diskette or CD-ROM provided with the
accessory board.
Removing an Accessory Board
Follow the steps in the preceding section “Installing an Accessory Board,” but
instead of installing a card, remove the PCI card and replace the slot cover.