HP Netserver L Server series - Manual (Page 74)

Chapter 8 Rack Mounting the HP Netserver (2-Post)
68
operating efficiency. For more information, see “Rack Configuration Tools” later
in this chapter.
Tools Required
You will need the following tools to install the HP Netserver in a 2-post rack:
•
Standard Phillips screwdriver
•
Marking pen or masking tape
HP Netserver Rack Mount Parts List
Ensure the rack-mounting kit provided with the HP Netserver contains the
following parts:
Table 8-1. Parts for Rack Mount Kit
Quantity Description
2 Flush mount brackets (one left and one right side)
2 Center mount brackets (one left and one right side)
8 Screws for Brackets (standard Phillips)
Rack Configuration Tools
The HP rack configuration tools, including white papers, are on HP's web site at
the following URL:
http:// www.hp.com/netserver
At the Web site, search for the following:
•
Configuration tools
•
High density rack solutions
•
Rack Assistant, Rack Configuration
•
Order Assistant
•
HP Netserver High Density Rack Solutions Overview (LP 1000r and LP
2000r)
You can read about the tools or download copies for installation. These tools can
be used to plan a rack configuration for the components in your system.
The white papers, particularly the HP Netserver High Density Rack Solutions
Overview (LP 1000r and LP 2000r), provide rack information for HP Netservers