Disable ipx/spx, Disable appletalk, Disable dlc/llc – HP LaserJet P3005 Printer series User Manual
Page 58: Disable ipx/spx disable appletalk disable dlc/llc
●
Provides only pertinent information on the configuration page
●
Allows the printer control panel to display protocol-specific error and warning messages
Disable IPX/SPX
NOTE
Do not disable this protocol in Windows-based systems that print to the printer through
IPX/SPX.
1.
Press
Menu
.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight I/O, and then press .
4.
Press
to highlight EMBEDDED JETDIRECT, and then press .
5.
Press
to highlight IPX/SPX, and then press .
6.
Press to select ENABLE.
7.
Press
to highlight OFF, and then press .
8.
Press
Menu
to return to the Ready state.
Disable AppleTalk
1.
Press
Menu
.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight I/O, and then press .
4.
Press
to highlight EMBEDDED JETDIRECT, and then press .
5.
Press
to highlight APPLETALK, and then press .
6.
Press to select ENABLE.
7.
Press
to highlight OFF, and then press .
8.
Press
Menu
to return to the Ready state.
Disable DLC/LLC
1.
Press
Menu
.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight I/O, and then press .
4.
Press
to highlight EMBEDDED JETDIRECT, and then press .
5.
Press
to highlight DLC/LLC, and then press .
6.
Press to select ENABLE.
7.
Press
to highlight OFF, and then press .
8.
Press
Menu
to return to the Ready state.
46
Chapter 3 Input/output (I/O) configuration
ENWW