HP LaserJet P3005 Printer series - Manual (Page 41)

Item Values Explanation
ON JOB: The clearable warning message appears until the end of
the job that generated the message.
ON: The clearable warning message appears until you
press
.
The default setting is JOB.
AUTO CONTINUE OFF
ON
Determines how the device reacts to errors. If the device is on
a network, you probably want to turn AUTO CONTINUE to
ON.
ON: If an error occurs that prevents printing, the message
appears on the device control-panel display, and the device
goes offline for 10 seconds before returning online.
OFF: If an error occurs that prevents printing, the message
remains on the device control-panel display, and the device
remains offline until you press
.
The default setting is ON.
CARTRIDGE LOW STOP
CONTINUE
Determines how the device behaves if the print cartridge is low.
Print quality is not guaranteed if you print after receiving this
message.
STOP: The device pauses printing until you replace the print
cartridge or press
each time you turn the device on. The
message appears until you replace the print cartridge.
CONTINUE: The device continues to print, and the message
appears until you replace the print cartridge.
The default setting is CONTINUE.
CARTRIDGE OUT STOP
CONTINUE
Determines how the device reacts if the print cartridge is
empty.
STOP: The device stops printing until you replace the print
cartridge.
CONTINUE: The device continues to print, and the REPLACE
CARTRIDGE message appears until you replace the print
cartridge. HP does not guarantee print quality if you select
CONTINUE after a REPLACE CARTRIDGE condition.
Replace the print cartridge as soon as possible to ensure good
print quality.
If the end of drum life is reached, the device stops, regardless
of the CARTRIDGE OUT setting.
The default setting is CONTINUE.
JAM RECOVERY AUTO
OFF
ON
Determines how the device behaves if a jam occurs.
AUTO: The device automatically selects the best mode for
device jam recovery (usually ON).
OFF: The device does not reprint pages following a jam.
Printing performance might be increased with this setting.
ON: The device automatically reprints pages after a jam is
cleared.
ENWW Configure Device menu 29