Electrical specifications, Acoustic specifications, Electrical specifications acoustic specifications – HP LaserJet P3005 Printer series User Manual
Page 181: Electrical, Specifications, Enww electrical specifications 169
Electrical specifications
WARNING!
Power requirements are based on the country/region where the device is sold. Do
not convert operating voltages. This can damage the device and void the product warranty.
Table C-3
Power requirements
Specification
110-volt models
220-volt models
Power requirements
110 to 127 volts (± 10%)
50/60 Hz (± 2 Hz)
220 to 240 volts (± 10%)
50/60 Hz (± 2 Hz)
Rated current
7.0 Amps
4.0 Amps
Table C-4
Power consumption (average, in watts)
Device model
Printing
Ready
Sleep
Off
HP LaserJet P3005
600 W
9 W
8.5 W
0.2 W
HP LaserJet P3005d
600 W
9 W
8.5 W
0.2 W
HP LaserJet P3005n
600 W
9 W
8.5 W
0.2 W
HP LaserJet P3005dn
600 W
9 W
8.5 W
0.2 W
HP LaserJet P3005x
600 W
9 W
8.5 W
0.2 W
1
Values subject to change. Se
for current information.
2
Power numbers are the highest values measured using all standard voltages.
3
Default time from Ready mode to Sleep = 30 minutes.
4
Heat dissipation in Ready mode = 35 BTU/hour.
5
Recovery time from Sleep to start of printing = less than 8.5 seconds.
6
Print speed is 35 ppm.
Acoustic specifications
Table C-5
Sound power and pressure level
Sound power level
Declared per ISO 9296
Printing
L
WAd
= 6.5 Bels (A) [65 dB(A)]
Ready
Essentially Inaudible
Sound pressure level
Declared per ISO 9296
Printing
L
pAm
=51 dB (A)
Ready
Essentially Inaudible
1
Values subject to change. Se
for current information.
2
Configuration tested: base device, simplex printing with A4 paper size.
3
Print speed is 35 ppm.
ENWW
Electrical specifications
169