HP LaserJet P3005 Printer series - Manual (Page 42)

Item Values Explanation
The default setting is AUTO.
RAM DISK AUTO
OFF
Determines how the RAM disk is configured.
AUTO: Allows the device to determine the optimal RAM-disk
size based on the amount of available memory.
OFF: The RAM is disabled.
NOTE If you change the setting from OFF to
AUTO, the device automatically reinitializes when it
becomes idle.
The default setting is AUTO.
LANGUAGE (DEFAULT)
Several
Selects the language for the messages that appear on the
device control-panel display.
The default setting is determined by the country/region in
which the device is purchased.
30 Chapter 2 Control panel ENWW