HP LaserJet P3005 Printer series - Manual (Page 132)

Control panel message Description Recommended action
Canceling... The device is in the process of canceling a
job. The message appears while the job is
stopped, the paper path is flushed, and any
remaining incoming data on the active data
channel is received and discarded. No action necessary.
Checking paper path The engine is turning the rollers to check for
possible jams. No action necessary.
Checking printer The engine is performing an internal test. No action necessary.
CHOSEN PERSONALITY NOT
AVAILABLE
alternates with
To continue press
The device encountered a request for a
personality that did not exist in the device.
The job is cancelled and no pages are
printed. ● Press to continue.
● Try a different driver.
CLEANING DISK X% COMPLETE
alternates with
DO NOT POWER OFF
The memory disk is being cleaned. This
process might take up to an hour. During this
time, no jobs can be printed. Do not turn off the device. Wait for the
process to complete.
The device automatically restarts at the end
of the cleaning process.
Cleaning... The device is processing the cleaning page. No action necessary.
Clearing event log This message appears while the event log is
cleared. The device then returns to the
SERVICE menu. No action necessary.
Clearing paper path The device jammed or detected misplaced
media. The device is attempting to eject these
pages automatically. No action necessary.
CLOSE TOP COVER AND FRONT DOOR The top cover and front door need to be
closed. Close the top cover and front door.
CODE CRC ERROR An error has occurred during a firmware
upgrade. ● Reinstall the firmware.
● If the problem persists, contact
HP Support.
Creating...CLEANING PAGE The device is generating a cleaning page.
The device returns to the Ready state after
the cleaning page is printed. ● Load the cleaning page into tray 1.
● Press Menu .
● Select PRINT QUALITY, and then press
● Select PROCESS CLEANING PAGE,
and then press
DATA RECEIVED
alternates with
Ready
The device received data and is waiting for a
form feed. When the device receives another
file, the message disappears.
The device is paused.
If the device is waiting for a form feed,
press
to continue.
If the device is paused, press Stop to
continue.
Event Log Empty SHOW EVENT LOG was selected from the
control panel, and the event log is empty. No action necessary.
GENUINE HP SUPPLIES DESIGNED FOR
alternates with
This genuine HP supply was not designed for
this device and is not supported. The device
can print with this supply, but print quality
might be affected. Replace this supply with a genuine HP supply
that is designed for this device.
120 Chapter 7 Problem solving ENWW