HP LaserJet P3005 Printer series - Manual (Page 39)

Item Values Explanation
CREATE CLEANING PAGE There is no value to select. Press to print a cleaning page (for cleaning toner from the
fuser). Follow the instructions on the cleaning page. For more
information, see
Clean the device .
PROCESS CLEANING
PAGE There is no value to select. This item is available only after a cleaning page has been
created. Follow the instructions that are printed on the cleaning
page. The cleaning process might take up to 2.5 minutes.
System Setup submenu
Items on this menu affect device behavior. Configure the device according to your printing needs.
Item Values Explanation
DATE/TIME DATE
DATE FORMAT
TIME
TIME FORMAT
Sets the date and time settings.
JOB STORAGE LIMIT 1 to 100 Specifies the number of quick copy jobs that can be stored on
the device.
The default setting is 32.
JOB HELD TIMEOUT OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK
Sets the amount of time that held jobs are kept before being
automatically deleted from the queue.
The default setting is OFF.
SHOW ADDRESS AUTO
OFF
Defines whether or not the IP address will be shown on the
display if the device is connected to a network. If AUTO is
selected the IP Address of the device appears with the
Ready message.
The default setting is AUTO.
TRAY BEHAVIOR USE REQUESTED TRAY
MANUALLY FEED PROMPT
PS DEFER MEDIA
SIZE/TYPE PROMPT
USE REQUESTED TRAY: Determines whether the device
tries to pull media from a different tray than the one that you
selected in the printer driver.
● EXCLUSIVELY: Sets the device to pull from the tray that
you selected and not pull from another tray, even if the
tray that you selected is empty.
● FIRST: Sets the device to pull from the tray that you
selected first, but allows the device to pull from another
tray automatically if the tray that you selected is empty.
ENWW Configure Device menu 27