HP LaserJet P3005 Printer series User Manual
Page 147
●
Try printing to a different output bin.
●
The sheets might be sticking together. Try bending the stack to separate each sheet. Do not fan
the stack.
●
If you are printing from tray 1, try feeding fewer sheets of media at a time.
●
If you are printing small sizes (such as index cards), make sure that the media is oriented correctly
in the tray.
●
Turn over the media stack in the tray. Also, try rotating the stack 180°.
●
Try rotating media to feed through the device from a different orientation.
●
Check the media quality. Do not use damaged or irregular media.
●
Use only media that meets HP specifications. See
●
Do not use media that has already been used in a device or copier. Do not print on both sides of
envelopes, transparencies, vellum, or labels.
●
Do not use media with staples or media that has had the staple removed. Staples can damage the
device and can void warranty.
●
Make sure that the power supplied to the device is steady and meets device specifications. See
●
Clean the device. See
.
●
Contact an HP-authorized service or support provider to perform routine device maintenance. See
the support flyer that was included with the device, or see
.
ENWW
Clear jams
135