HP Photosmart C5580 All-in-One Printer - Manual (Page 90)

This section contains the following topics:
• Set the number of copies
• Set the copy paper size
• Set the copy paper type
• Change copy speed or quality
• Adjust the lightness and darkness of your copy
Set the number of copies
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task explains how to set the number of copies from the
control panel only.
To set the number of copies from the control panel
1. Press OK when Copy is highlighted on the Home Screen.
2. Press the up arrow button to increase the number of copies, up to the maximum.
(The maximum number of copies varies by model.)
3. Press Start Copy Black or Start Copy Color.
Set the copy paper size
You can set the paper size on the HP All-in-One. The paper size you select should match
what is loaded in the input tray.
To set the paper size from the control panel
1. Press OK when Copy is highlighted on the Home Screen.
2. Press the Menu button to select Copy Settings.
3. Press the down arrow button to highlight Paper Size and then press OK.
4. Press the down arrow button to highlight the appropriate paper size present in the
input tray, and then press OK.
Set the copy paper type
You can set the paper type on the HP All-in-One. The default paper type setting for
copying is Automatic, which causes the HP All-in-One to detect the type of paper in the
input tray.
To set the paper type for copies
1. Press OK when Copy is highlighted on the Home Screen.
2. Press the Menu button to select Copy Settings.
Change the copy settings for the current job 87
Co
py