HP Photosmart Premium Fax C309 - Manual (Page 151)

1 Telephone wall jack
2 Use the phone cord supplied in the box with the product
If you used a 4-wire phone cord, disconnect it, find the supplied 2-wire phone cord, and then connect the 2-wire
phone cord to the port labeled 1-LINE on the back of the product.
If the product came with a 2-wire phone cord adapter, you can use it with a 4-wire phone cord, in case the
supplied 2-wire phone cord is too short. Attach the 2-wire phone cord adapter to the port labeled 1-LINE on the
back of the product. Attach your 4-wire phone cord to the open port on the adapter and to the telephone wall
jack. For more information on using the 2-wire phone cord adapter, see the documentation that came with it.
For more information on setting up the product, see the printed documentation that came with the product.
Cause: The wrong phone cord was used to connect the product or the phone cord was plugged into the wrong
port.
If this did not solve the issue, try the next solution.
Solution 4: Make sure other office equipment is connected correctly
Solution
NOTE: This possible solution applies only in the countries/regions that receive a 2-wire phone cord in the
box with the product, including: Argentina, Australia, Brazil, Canada, Chile, China, Colombia, Greece, India,
Indonesia, Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland, Portugal, Russia,
Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA, Venezuela, and Vietnam.
Make sure you have correctly connected the product to the telephone wall jack, and correctly connected any
additional equipment and services that share the phone line with the product.
Use the port labeled 1-LINE on the back of the product to connect to the telephone wall jack. Use the 2-EXT
port to connect to any other equipment, such as an answering machine or a telephone, as shown below.
Fax troubleshooting 149
Solve a problem