beautypg.com

Text is incorrect or missing, Scanned image shows dotted lines instead of text, Text format is incorrect – HP Photosmart Premium Fax C309 User Manual

Page 139

background image

Scanned image shows dotted lines instead of text

Solution: Make a black-and-white copy of the original and then scan the copy.

Cause: If you used the Text image type to scan text that you planned to edit, the scanner might not have
recognized color text. The Text image type scans at 300 x 300 dpi, in black and white.

If you scanned an original that has graphics or artwork surrounding the text, the scanner might not have
recognized the text.

Text format is incorrect

Solution: Some applications cannot handle framed text formatting. Framed text is one of the scan document
settings in the software. It maintains complex layouts, such as multiple columns from a newsletter, by putting
the text in different frames (boxes) in the destination application. In the software, select the correct format so
that the scanned text layout and formatting are retained.

Cause: The scan document settings were incorrect.

Text is incorrect or missing

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the
first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Adjust the brightness in the software

Solution 2: Clean the glass and lid

Solution 3: Select the correct OCR language

Solution 1: Adjust the brightness in the software

Solution: Adjust the brightness in the software, and then rescan the original.

Cause: The brightness was not set correctly.

If this did not solve the issue, try the next solution.

Solution 2: Clean the glass and lid

Solution: Turn off the product, unplug the power cord, and use a soft cloth to wipe the glass and the back of
the document lid.

Cause: Debris might have been stuck on the glass or on the back of the document lid. This can cause poor-
quality scans.

If this did not solve the issue, try the next solution.

Solution 3: Select the correct OCR language

Solution: Select the correct OCR language in the software.

NOTE:

If you are using HP Photosmart Essential, the Optical Character Recognition (OCR) software might

not be installed on your computer. To install the OCR software, you must re-insert the software disk and
select OCR under the Custom installation options.

Cause: The scan document settings were not set to the correct optical character recognition (OCR) language.
The OCR language tells the software how to interpret the characters it sees in the original image. If the OCR
language
does not match the language in the original, the scanned text might be incomprehensible.

137

Solve a problem