A library characteristics, Physical specifications and requirements, 16 physical characteristics – HP ESL E-series Tape Libraries User Manual
Page 87: 17 interfaces
A Library characteristics
This appendix lists characteristics and specifications of the library. These characteristics and
specifications are presented in:
• Physical specifications and requirements
• Performance and reliability characteristics
• Environmental specifications
NOTE:
Tape drive and media specifications are described in
Physical specifications and requirements
and
provide dimensions and other physical characteristics of the library unit.
Table 16 Physical characteristics
Library dimensions and weight
Width
30 in. (76 cm)
Depth
48 in. (122 cm)
Footprint
30 x 48 in. (76 x 122 cm)
Height
75 in. (191 cm)
Weight
Fully loaded library: 1700 lbs. (771 kg)
Drives: 13.5 lbs. (6.12 kg) each
Cartridges: 7.7 oz. (2.18 kg) each
Tape drives and cartridges
Tape Drives, Max. No.
Up to 24 tape drives
Cartridges, Max. No.
630 SDLT tapes / 712 Ultrium tapes
Table 17 Interfaces
Host to library interfaces
Software
SCSI-2 medium changer command set
Power input
Power cord
1 or 2 standard US C19 to NEMA L6–20P rated at
250 VAC and 16 amps
Host to tape drive interface
Software
SCSI-2
HP StorageWorks
87