HP ESL E-series Tape Libraries - Manual (Page 16)

1 2
1 OCP buttons
2 Green LED
Figure 3 OCP
The OCP consists of the following features (see Table 2 ):
Table 2 OCP features
Feature Description
OCP
The OCP displays library status information and allows you to access the library
menus. These menus allow you to view or change the library settings, run
demonstration programs, or run diagnostic tests.
The OCP is discussed in Using the OCP.
OCP buttons
Use these buttons in combination with the OCP to scroll through screens and select
options or commands. The functionality of these buttons changes depending on
the currently displayed screen.
LED indicator
The green LED lights when the library is fully operational and ready to accept
host commands. It flashes while the library is transitioning from a READY state to
a NOT READY state. The library will not be READY during power-on self-tests,
when magazines are being released, or during access to certain menu items.
NOTE:
You can also perform diagnostics using HP StorageWorks Library and Tape Tools (L&TT), available
from http://www.hp.com/support/tapetools . Additionally, you can configure the library and monitor
library status using HP StorageWorks Command View TL that shipped with your product. For support
information, visit http://www.hp.com/support/cvtl .
Library robotics
The library robotics consists of the main components identified in Figure 4 .
16 Library overview