HP ESL E-series Tape Libraries - Manual (Page 126)

Event ID Critical events
0x207 Picker hardware failure - mapping failure
0x208 Picker hardware failure - force error
0x209 Picker hardware failure - sensor failure
0x20a Picker hardware failure - electronics not present
0x20b Extension hardware failure
0x20c Extension hardware failure of encodor/motor
0x20d Extension hardware failure of home sensor/flag
0x20e Extension hardware failure - mechanical position error
0x20f Extension hardware failure - timeout
0x210 Extension hardware failure - obstruction
0x211 Extension hardware failure - FPGA failure
0x212 Extension hardware failure - positional drift
0x213 Extension hardware failure - mapping failure
0x214 Extension hardware failure - force error
0x215 Extension hardware failure - sensor failure
0x216 Extension hardware failure - electronics not present
0x217 Vertical hardware failure
0x218 Vertical hardware failure of encodor/motor
0x220 Vertical hardware failure of home sensor/flag
0x221 Vertical hardware failure - mechanical position error
0x222 Vertical hardware failure - timeout
0x223 Vertical hardware failure - obstruction
0x224 Vertical hardware failure - FPGA failure
0x2c2 Parse error
0x2c3 Missing HBA for partition $partition
0xb01 CLM $name sensor needs attention, status $status
Warning events
Warning events indicate that a possible error condition exists within the cabinet. These events give the
user a chance to check the cabinet before a failure occurs.
NOTE:
The “$” in the table below are variables and are filled in at run-time.
Table 24 lists the warning events provided by the library.
126 Event reporting