E event reporting, Critical events, 23 critical events – HP ESL E-series Tape Libraries User Manual
Page 123

E Event reporting
The library is capable of reporting a variety of events that occur within the cabinet. An event is defined
as any occurrence of interest to you, the user, that may require your attention and possible intervention.
These events are reported through the OCP and in library support tickets. Find more information on the
events by generating a support ticket with Command View or L&TT. Events classified as informational
might not be displayed.
Library events are broken up into the following sections:
• Critical events
• Warning events
• Information events
NOTE:
This information is the same as that presented in the
HP StorageWorks ESL-Series Tape Library
users guide.
Critical events
Critical events indicate that a failure has occurred in the cabinet. The user must intervene to return the
cabinet to operation.
NOTE:
The “$” in the table below are variables and are filled in at run-time.
lists the critical events provided by the library.
Table 23 Critical events
Event ID
Critical events
0x1a0
$name sensor in cabinet $framename needs attention, value $value
0x1a1
$name sensor needs attention, status $status
0x1a2
Tape inventory failed
0x1a3
Tape Alert Flag 4 for drive $drive - Media
0x1a4
Tape Alert Flag 5 for drive $drive - Read Failure
0x1a5
Tape Alert Flag 6 for drive $drive - Write Failure
0x1a6
Tape Alert Flag 9 for drive $drive - Write Protect
0x1a7
Tape Alert Flag 13 for drive $drive - Recoverable Snapped Tape
0x1a8
Tape Alert Flag 14 for drive $drive - Unrecoverable Snapped Tape
0x1a9
Tape Alert Flag 16 for drive $drive - Forced Eject
0x1aa
Tape Alert Flag 20 for drive $drive - Clean Now
0x1ab
Tape Alert Flag 22 for drive $drive - Expired Cleaning Media
0x1ac
Tape Alert Flag 23 for drive $drive - Invalid Cleaning Cartridge
HP StorageWorks
123