HP ESL E-series Tape Libraries - Manual (Page 57)

Table 10 OCP components for a secondary cabinet of a Cross Linked system
Screen Displays Options to view or select
Home Status
Library Name, Date, Model Number, IP Address, Slots,
Drives, Ports
Menu Menu items Cabinet, Health Status, Setup, Event Log
Ports Load Ports
Open Left Load Port, Open Right Load Port, Open Both
Load Ports
Ops Operations
Cabinet
• Online
• Offline
• Details
• Inventory
Drive All
• Reset
• Unthread
• On
• Off
Drive #
• Details
• Reset
• Unthread
• On
• Off
Diags Diagnostics
Robotics Self Test, Individual Axis Self Test, Robotics to
Home Position, Calibrate Cabinet, Read Cabinet Serial
Number, Read Cabinet IEEE Id, Read Cabinet Type
NOTE:
The STOP button located in the bottom right-hand portion of the OCP is available from every OCP
screen. This button stops the cabinet robot from moving and takes the cabinet offline. To start the robotics
and return the cabinet to the online state, press the Start button.
The following sections provide information on each function available from the library OCP:
• Menu screen
• Load Ports screen
• Operations screen
• Diagnostics screen
• Stop button
Menu screen
The Menu screen provides access to contact and cabinet information, as well as providing a way
to setup library information.
To access the Menu screen, press Menu from the Home screen. The OCP displays the Menu screen
(see Figure 32 ):
HP StorageWorks 57