HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 668)

Return Code Explanation
1015 Details
The Offline path cannot be placed Online.
Action
Remove the error in the path, and then retry.
If you perform the view operation (specifying -path or -lu)
of the HDLM command and the offline path (E) has a
PathName target ID (in hexadecimal) that is
0000000000000100 or more, the Offline(E) path cannot
be brought online by the online command or auto failback.
To bring the path online, execute the dlmcfgmgr utility
(dlmcfgmgr -r).
1016 Details
The target path(s) are already Online.
Action
Update the host information, and then check the path
status.
1017 Details
The target path(s) are already Offline(C).
Action
Update the host information, and then check the path
status.
1019 Details
An error occurred during HDLM internal processing.
Action
Execute the DLMgetras utility for collecting HDLM error
information, and then contact your HDLM vendor or the
maintenance company if you have a maintenance contract
for HDLM. For details on the DLMgetras utility, see
DLMgetras Utility for Collecting HDLM Error Information on
page 7-3 .
1020 Details
An unexpected error occurred during HDLM internal
processing.
Action
Execute the DLMgetras utility for collecting HDLM error
information, and then contact your HDLM vendor or the
maintenance company if you have a maintenance contract
for HDLM. For details on the DLMgetras utility, see
DLMgetras Utility for Collecting HDLM Error Information on
page 7-3 .
1025 Details
A parameter value is invalid.
Action
Refresh the host information, and then perform the
operation again. If the same error occurs again, execute the
DLMgetras utility for collecting HDLM error information, and
8-156
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide