HP Hitachi Dynamic Link Manager Software Licenses User Manual
Page 335

Figure 4-9 Example of Editing /etc/elilo.conf file
Edit the shaded portion.
33
.
Copy the configuration that was used for startup from the HDLM device.
34
.
Assign a name to the copied configuration that indicates that the
configuration is used for specifying the HDLM device after update.
¢
If you will use GRUB as the boot loader
Change title.
¢
If you will use ELILO as the boot loader
Change label.
35
.
Edit the specification for root written in the boot loader configuration file.
From the following, perform the procedure corresponding to the host OS:
¢
For Red Hat Enterprise Linux 6:
Specify a root device name or UUID for root.
To specify a root device name for root:
a
.
Execute the mount command to check the root device name.
Below is an example of executing the command. The underlined
part is the root device name.
# mount
/dev/mapper/systemvg-rootlv on / type ext4 (rw)
HDLM Operation
4-31
Hitachi Dynamic Link Manager (for Linux®) User Guide