HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 431)

Items displayed by the dlnkmgr view
-path -item command
Values specified after the -item
parameter
DNum dnu
HDevName hd
IEP iep
HBAPortWWN hbaportwwn
Physical-LDEV phys
Virtual-LDEV virt
Physical-DskName vid
Physical-iLU vid
Physical-ChaPort vid
Org-DskName ha
Org-iLU ha
#
Because both PathID and Status are always displayed, you do not
have to specify any parameters.
In the sub-parameters following -path -item, you can list the paths
(-hdev) and sort the list (-srt). If you omit both parameters, the
command displays information for all the paths in ascending order of
AutoPATH_IDs.
These sub-parameters are:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see Table
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-29 in
Parameters on page 6-16 .
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
Specify the name of the logical device file (minus the partition
number), /dev/sddlm[aa-pap], for the HDLM device. For details on
logical device files for HDLM devices, see Logical Device Files for
HDLM Devices on page 2-11 .
The host-device-name string is case-sensitive.
Command Reference
6-43
Hitachi Dynamic Link Manager (for Linux®) User Guide