HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 180)

# volname /dev/cdrom
VOL01234
#
4
.
Check the version of HDLM.
Execute installux.sh or the HDLM installation utility (installhdlm)
stored on the HDLM DVD-ROM to check the version of HDLM that will be
installed.
The following example shows how to execute the command when the
mount point for the DVD-ROM is /media/cdrom:
¢
When executing installux.sh
# /media/cdrom/installux.sh -v
¢
When executing the installhdlm utility
# /media/cdrom/HDLM_Linux/installhdlm -v
A command execution example is described below. x.x.x-xx is the version
of HDLM.
KAPL09177-I HDLM version: x.x.x-xx
5
.
Perform the installation.
Execute installux.sh or the installhdlm utility stored on the HDLM
DVD-ROM to start installation.
The following shows an installation execution example for when the DVD-
ROM mount point is /media/cdrom.
¢
When executing installux.sh
# /media/cdrom/installux.sh
¢
When executing the installhdlm utility
# /media/cdrom/HDLM_Linux/installhdlm
6
.
The KAPL09093-I message is displayed to confirm that you want to
perform a new installation. Check the HDLM version, and if it is correct,
enter y.
The license key file will be deleted when installation finishes.
7
.
Make sure that HDLM is installed.
Execute the following command to display detailed information about the
installed package.
# rpm -qi HDLM
Name : HDLM
Version : x.x.x.x.xxx
3-108
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Linux®) User Guide