Restoring the factory default configuration, Table 17 factory default configuration settings, 17 factory default configuration settings – HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class User Manual
Page 87
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide
87
• Configured Zoning — restores all configured zone sets, zones, and aliases in the switch’s zoning
database, excluding the active zone set. Refer to ”
Configuring the zoning database
for more information.
• Configured Security — restores all security sets in the switch database. Refer to ”
on page 30 for more information.
• Radius Server — restores all RADIUS Server information defined in the switch database. Refer to
” on page 25 for more information.
7.
If you select the Configured Zoning or Full Restore option and the file contains zone sets, a dialog
prompts you to activate one of those zone sets. Click Yes. Select a zone set from the drop-down list in
the Select Zone Set to be Activated dialog.
8.
Click OK and view the results in the top pane of the Restore dialog.
Restoring the factory default configuration
You can restore the switch and port configuration settings to the factory default values. Select Switch >
Restore Factory Defaults to restore the factory configuration on a switch.
lists the factory default
switch configuration settings. Restoring the switch to the factory default configuration does not restore the
account name and password settings. The most current port license will remain in effect. To restore user
accounts, you must select the Reset Password File option in the maintenance menu. Refer to “Recovering a
Switch Using Maintenance Mode” in the McDATA 4Gb SAN Switch for HP p-Class BladeSystem
installation guide for your switch for information about maintenance mode and the maintenance menu.
Table 17
Factory default configuration settings
Setting
Value
Symbolic Name
McDATA4GbSAN
Administrative State
Online
Domain ID
97
Domain ID Lock
False
In-band Management
True
Broadcast Support
Enable
Resource Allocation Timeout (R_A_TOV)
10000 milliseconds
Interop Mode
Standard
Device Scan Enabled
True
Error Detect Timeout (E_D_TOV)
2000 milliseconds
SNMP Enabled
True
SNMP Proxy
True
IP Address
10.0.0.1
FDMI Enabled
True
FDMI HBA Entry Level
1000
Subnet Mask Address
255.0.0.0
Gateway Address
10.0.0.254
Network Discovery
Static
Remote Logging
False
Remote Logging Host Ip Address
10.0.0.254
NTP Client Enabled
False