HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 155)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 155
setup [option]
Changes SNMP and system configuration settings. Refer to the Set Setup command.
switch [state]
Changes the administrative state for all ports on the switch to the state given by [state]. The
previous Set Config Switch settings are restored after a switch reset or a reactivation of a switch
configuration. [state] can be one of the following:
online
Places all ports online
offline
Places all ports offline.
diagnostics
Prepares all ports for testing.
timezone
Specifies the time zone for the switch and the workstation. The default is Universal Time (UTC)
also known as Greenwich Mean Time (GMT). This operand prompts you to choose a region, then
a subregion to specify the time zone.
Examples The following examples enables and disables the beacon:
McDATA4GbSAN #> set beacon on
Command succeeded.
McDATA4GbSAN $> set beacon off
Command succeeded.
See also Set Config command , page 156
Set Log command , page 166
Set Port command , page 169
Set Setup command , page 170