Cimsubscription command – HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class User Manual
Page 116
116 Command Line Interface
CIMSubscription command
Description Creates, edits, or removes CIM subscriptions.
Authority Admin session and a CIM Edit session.
Syntax
cimsubscription
create [subscription_name]
delete [subscription_name]
edit [subscription_name]
Operands
create [subscription_name]
Prompts you in a line-by-line fashion to create a CIM subscription with the name given by
[subscription_name]. [subscription_name] can have up to 32 characters: 0—9, A—Z, a—z, _, $,
^, and -.
describes the CIM subscription configuration parameters.
Table 30
CIM Subscription configuration parameters
Parameter
Description
Name
Subscription name
FilterID
Event type for which the switch monitors and sends an indication to the CIM
client. The event types are as follows:
CreateComputerSystem — a switch is added to the fabric. This is the
default.
ModifyComputerSystem — a switch state change
DeleteComputerSystem — a switch is removed from the fabric
CreateFCPort — not supported
ModifyFCPort — an FC port state change
DeleteFCPort — not supported
EnabledState
Enable (True) or disable (False) the subscription. The default is True.
Duration
Subscription life span in seconds. The subscription life span begins when
the subscription is created. Expired subscriptions do not send indications to
the CIM client though they remain in the CIM database. Values can be
1–720000. 0 indicates indefinite, which is the default.
delete [subscription_name]
Deletes the subscription given by [subscription_name] from the CIM database.
edit [subscription_name]
Opens an editing session in which you can modify the CIM subscription given by
for a description of the CIM subscription configuration
parameters.