HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 181)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 181
RxOfflineSeq Number of offline sequences received. An OLS is issued for link
initialization, a Receive & Recognize Not_Operational (NOS) state, or to
enter the offline state.
TotalErrors Total number of errors detected
TotalLIPsRecvd Number of loop initialization primitive frames received by this port
TotalLIPsXmitd Number of loop initialization primitive frames transmitted by this port
TotalLinkResets Total number of link reset primitives
TotalOfflineSeq Total number of Offline Sequences issued and received by this port
TotalRxFrames Total number of frames received by this port
TotalRxWords Total number of words received by this port
TotalTxFrames Total number of frames issued by this port
TotalTxWords Total number of words issued by this port
TxLinkResets Number of Link Resets issued by this port
TxOfflineSeq Total number of Offline Sequences issued by this port
Table 53 Show Port parameters (continued)
Entry Description
post log
Displays the POST log which contains results from the most recently failed POST.
setup [option]
Displays setup attributes for the system, SNMP, and the switch manufacturer. Refer to the Set
Setup command.
steering [domain_id]
Displays the routes that data takes to the switch given by [domain_id]. If you omit [domain_id],
the system displays routes for all switches in the fabric.
support
Executes a series of commands that display a complete description of the switch, its
configuration, and operation. The display can be captured from the screen and used for
diagnosing problems. This operand is intended for use at the request of your authorized
maintenance provider. The commands that are executed include the following:
• Alias List
• Config List
• Date
• Group List
• History
• Ps
• Security (List, Limits, History)
• Securityset (Active, List)