HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 24)

24 Using McDATA Web Server
Opening the faceplate popup menu
To open the popup menu, right-click on the faceplate image to present the following tasks.
• Refresh the switch
• Select all ports
• Manage switch properties
• Manage network properties
• Manage SNMP properties
• Manage port properties
• Change the port symbolic name
• Run the port loopback tests
• Services
• Security Consistency Checklist
If no ports are selected, the port-related tasks will be unavailable in the menu. Right-click a port to open the
Port popup menu. Press and hold Shift or Control to select more than one port. Right-click one of the
selected ports to unselect multiple ports.
Faceplate data windows
The faceplate display provides the following data windows corresponding to the data window tabs:
• Devices — displays information about devices (hosts and storage targets) connected to the switch.
• Switch — displays current switch configuration data.
• Port Statistics — displays performance data for the selected ports.
• Port Information — displays information for the selected ports.
• Configured Zonesets — displays all zone sets, zones, and zone membership in the zoning database.
• Configured Security — displays all security definitions currently saved in the database.
• Active Security — displays the active security set.