HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 132)

132 Command Line Interface
Hardreset command
Description Resets the switch and performs a POST. This reset disrupts traffic, activates the pending firmware, and
clears the alarm log. To save the alarm log before resetting, refer to the Set Log command.
Authority Admin session
Syntax
hardreset
Notes To reset the switch without a POST, refer to the Reset command.
To reset the switch without disrupting traffic, refer to the Hotreset command.
See also Hotreset command , page 135
Reset command , page 144
Set Log command , page 166