HP NonStop G-Series - Manual (Page 88)

5157/5157 ACL S-Series DLT Subsystems installation Users Guide
Installing and Configuring the 5157 ACL Tape Subsystem
5-15
5.6.14 Set Default:
This option resets the entire preceding configuration options to
their factory defaults.
NOTE: Under no circumstances should this option be used.
Table 5-2 summarizes the configuration settings for the ACL. The default settings are
shown in the third column. Other possible settings are shown in the second column.
Table 5-2 5157 ACL Configuration Options
Option Settings Default
Data Format Density: Auto Selection
Compression: Enable, Disable
(Enable at 10.0 only)
Auto
Auto
SCSI Lib Bus Parity: Enable, Disable
Lib Bus ID: (SCSI ID)
DLT1 Bus ID: (SCSI ID) Enabled
3
5
Library Mode Random, Seq. DLT1
Sequential Mode: Normal,
Recirculate Sequential
Normal
Element Base Transport: NNNN (hex)
Storage: NNNN (hex)
Transfer: NNNN (hex) 0000
0001
00F0
Identification Vendor ID: OVERLAND
Product ID: LXB
TSI
515X ACL
Date DD, MMM, YYYY Current date
Time HH, MM Current Time
Baud Rate [TSI CE Use Only] 38400
Serial Number NXNNNNNNN 999999999
Unload Mode Implicit, Explicit Implicit
AutoClean Mode Disabled, Enabled Disabled
Continued on next page