HP NonStop G-Series - Manual (Page 151)

5157/5157 ACL S-Series Subsystems Installation/Users Guide
Maintenance for the 5157 ACL
8-4
8.6 Autoclean Mode
If the Autoclean Mode is enable on the Configuration Menu, the
ALC will run the cleaning cartridge automatically whenever the
Use Cleaner LED comes on. This option can only be used when
operating in Random Library Mode.
8.7 Running the Cleaning Cartridge From the Front Panel
This procedure assumes that the cleaning cartridge has been
installed into Slot 1 of the magazine, and that no reserved slots are
set.
1. At the Default Screen, press the Enter button. The display will
show the following:
÷ ÷Load/Unload Load/Unload
Unlock Door Unlock Door
Show Status Menu Show Status Menu
Maintenance Menu Maintenance Menu к к
Figure 8-1 Main Menu
2. Press the ü button three times to move the ÷ next to
Maintenance Menu, then press the Enter button to select the
Maintenance Menu. The display will show something similar to
the following:
÷ ÷Clean Drive Clean Drive
Diagnostic Menu Diagnostic Menu
Demo Menu Demo Menu
Flash Update Flash Update к к
Figure 8-2 Maintenance Submenu