HP NonStop G-Series - Manual (Page 154)

Appendix A
i
Appendix A
5157 ACL Troubleshooting
A.1 GCSC Troubleshooting
A.1.1 Fault Screen
When a fault is detected, a screen similar to Figure A-1
appears. At the same time, either the Drive Fault or the
Loader Fault LED is illuminated.
Fault Code: XXXX Fault Code: XXXX
Error Description Error Description
ERP line 1 ERP line 1
ERP line 2 ERP line 2
Figure A-1 Fault Screen
The first line in Figure A-1 shows a numerical Fault
Symptom Code (FSC). The second line shows a brief
description of the error, in place of the words ‘Error
Description.’ The third and fourth lines will contain a one-
or two-line message describing the initial error recovery
procedure (ERP).
A.1.2 Display Error Logs
To display the error history of the module, use the Show
History menu. Access it as follows.
1. At the Default Screen, press the Enter button to enter
the Menu Mode. The Main Menu is displayed.
2. At the Main Menu, press the ü button five times until
the ÷ in the display is next to ‘Show History Menu.’
3. Press the Enter button to select the submenu.