HP NonStop G-Series - Manual (Page 45)

The 5157/5157 ACL S-Series Subsystems Installation/Users Guide
Installing and Configuring the 5157 Tape Drive
3-6
Figure 3-5 SCSI ID push button switch location
3.5 Connect the Cables
Section 3.5 includes the following topics:
•
Examine the 5157 Rear Panel
•
Connect the SCSI Signal Cable
•
Terminate the SCSI Bus
•
Connect the Power Cord
3.5.1 Examine the 5157 Rear Panel
Examine the components on the 5157 rear panel to complete the
physical installation (see Figure 3-6).