HP NonStop G-Series - Manual (Page 121)

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide
Operating the 5157 ACL Tape Drive 6-32
The ÷ is next to the line that reads ‘Load/Unload.’ Press the
Enter button to display the first Load/Unload submenu, which is
shown in Figure 6-26.
From: From:
ч ч*DLT1 *DLT1
To: To:
*Slot4 *Slot4 к к
Figure 6-26 Load/Unload Initial Screen
In Figure 6-26, the ÷ is next to line 2 of the display. Line 2 shows
the top item in a scrollable list of sources. Note that a
к к has
appeared on the right of the bottom line. This indicates that the ü
button may now be used to scroll through the list, and that the top
item on the list is displayed. As soon as the
ü button is pressed,
three things happen.
•
The list scrolls down one item (only line 2 scrolls).
•
A
é appears on the right of line 1 of the display. This indicates
that there is one or more items above the item displayed on line
2.
•
The Q at the left of line 2 disappears. This is because the
default selection has been scrolled offscreen, and an item from
the list has not been selected yet. The Q indicates the current
selection or the default selection.