HP NonStop G-Series - Manual (Page 110)

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide
Operating the 5157 ACL Tape Drive 6-21
6.10.10 Security Menu
The Security Menu permits the operator to lock the control panel,
preventing inadvertent or unauthorized access to the Menu Mode,
which takes the 5157 ACL offline.
Notes: 1) When the control panel is locked, the operator cannot
open the magazine door. 2) The operator can display the Status
Menu without unlocking the control panel by pressing the Escape
button at the Default Screen.
Set Unlock Code Set Unlock Code
Figure 6-15 Security Menu
Press the Enter button. The screen shown in Figure 6-16
Unlock Code
Unlock Code й й
“0000” “0000”
0000 Disables Lock
0000 Disables Lock к к
Figure 6-16 Code Select Submenu
An underlined cursor appears underneath the first digit. To set the
first digit, press the
ù button or the ü button until the desired
number is displayed. To move the cursor to the second digit, press
the Enter button. Repeat the process for each of the four digits. Be
sure to remember the 4-digit number, it will be needed in order to
enter the Menu Mode. An unlock code of 0000 disables control
panel locking.
Press the Escape button. The screen shown in Figure 6-17 appears.
The specific unit code is shown in place of XXXX.