HP NonStop G-Series - Manual (Page 50)

The 5157/5157 ACL S-Series Subsystems Installation/Users Guide
Installing and Configuring the 5157 Tape Drive
3-11
3.6.2 What to Do after POST
Table 3-3 After POST
If … Then . . .
All the events in Table 3-2 POST succeeded. Bring up the system
took place and run the optional system tests. See
Chapter 4 for operating the drive and
selecting density.
All left-or right-side indicators POST failed. See Table 3-4.
on the 5157 front panel blink
only.
3.7 5157 Troubleshooting Chart
If the 5157 drive fails during POST or operation, use Table 3-4 to
determine the problem and the action to take.