HP NonStop G-Series - Manual (Page 83)

5157/5157 ACL S-Series DLT Subsystems installation Users Guide
Installing and Configuring the 5157 ACL Tape Subsystem
5-10
2. Scroll down on the Configure Submenu until it says ‘Set
Reserved Slots,’ and select that option. The screen shown in
Figure 5-9 appears.
÷ Reserved Slots:
*0
Figure 5-9 Set Reserved Slots Submenu
3. With the ÷ next to line 1, press the Enter button. The ÷
moves to line 2,
ê appears at the end of line 4, and a é
appears at the end of line 1. Then use the ù and ü buttons
to scroll line 2 to specify the number of slots to be reserved.
Scroll to the desired number, then press the Enter button to
save the new selection.
For example, if there is a 5157 ACL with ten cartridge slots,
a slot may be reserved to store a cleaning cartridge by
following the instructions in Chapter 9-Maintenance for the
5157 ACL.
4. Press the Escape button repeatedly to return to the Default
Screen.