HP NonStop G-Series - Manual (Page 109)

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide
Operating the 5157 ACL Tape Drive 6-20
Depending on the presence or absence of a cartridge in the element
being reported, line 2 displays either ‘Empty’ or ‘Occupied.’
Depending on the report for each location, line 3 displays either
‘Label Valid’ or ‘Label Not Present.’
For each location reported, line 4 displays actual bar code on the
label with up to 8 characters. If there is no label, or if there is no
bar code reader installed, line 4 is blank.
6.10.7 Maintenance Menu
The Maintenance Menu and the options under it that are intended
for operator use are described in Chapter 9 – Maintenance for the
5157 ACL. Additional options on the Maintenance Menu that are
intended for use by service personnel are described in the Service
Manual.
6.10.8 Configure Menu
The Configure Menu, how to use it and the options available under
it are described in Chapter 5 – Installing and Configuring the 5157
ACL Tape Subsystem.
6.10.9 Show History Menu
The Show History Menu enables the operator to review the history
of the module. An example of the use of the Show History Menu,
appears later in this chapter under the heading ‘Displaying Error
Logs.’ The configuration history, the original configuration, as well
as statistics on the number of operations the library robotics and the
drives have performed can be retrieved using this menu.