HP NonStop G-Series - Manual (Page 40)

Installing and Configuring the 5157 Tape Drive
3-1
3
Installing and Configuring the 5157 Tape
Drive
3.1 In This Chapter
Chapter 3 includes the following main topics and sections:
Topic Section
In This Chapter
Prepare for the Installation
Install the Subsystem
Configure the 5157 tape drive
Connect the Cables
Test the Installation
5157 Troubleshooting Chart 3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.2 Prepare for the Installation
This section describes how to prepare for the installation of the
5157 tape drive subsystem including:
•
Before Starting
•
Installation Setup
•
Site Setup
•
Site Guidelines
3.2.1 Before Starting
Installing the 5157 tape drive subsystem requires no special tools.
If the switchpack setting on the rear panel needs to be changed, a
pen will be needed.
If problems are encountered during the installation, see Table 3-4
on page 3-13 for troubleshooting.