HP XP P9500 Storage - Manual (Page 70)

•
Data for the selected volume displays in the P-VOL box. The numbers indicate the volume
LDKC number, CU number, and LDEV number.
•
One P-VOL displays at a time, even if you selected multiple volumes for pairing. The
volume with the lowest number displays first.
5. Specify an S-VOL.
•
To create one pair, select the the CU number and LDEV number from the two S-VOL
boxes. If you selected multiple volumes as P-VOLs, the S-VOL you specify is paired with
the P-VOL displayed in P-VOL.
•
If you selected multiple volumes as P-VOLs and want to create multiple pairs, do one of
the following using the Select Other S-VOL(s) list to assign S-VOLs:
- Select Increment to add the secondary system LDEV incrementally. Your S-VOL LDEV
numbers must be numbered incrementally. For example, if you create three pairs and
specify 11 on the LDEV of P-VOL, the LDEVs on the secondary system are incremented
at 11, 12, and 13.
- Select Input Next to specify S-VOL LDEV numbers one at a time for each P-VOL. For
example, set the S-VOL LDEV for the current P-VOL and click Set, then reopen the dialog
box to set the next S-VOL, and so on.
- Select Relative to P-VOL to add the S-VOL LDEV numbers closest to the P-VOL’s LDEV
numbers. For example, if the LDEV number of the three P-VOLs are 001, 005, and 006,
and you select LDEV numbers 02 for the first S-VOL, LDEV numbers 06 and 07 are
assigned by the system as the next two S-VOLs.
6. In the Mirror box, proceed as follows.
1.
Select the master journal from the M-JNL list.
2. Select a mirror ID (0 to 3) from the Mirror ID list.
70 Pair operations