HP XP P9500 Storage - Manual (Page 179)

DKC Operation window
Use this window to view details about the remote systems, logical paths between systems, and
ports on the local system.
You can perform these procedures from the window:
•
“Configuring local and remote systems for Cnt Ac-J Z ” (page 60)
•
“Configuring additional logical paths ” (page 62)
•
View one of the following:
“Remote systems information ” (page 180) ◦
◦ “Logical Path Information” (page 181)
◦ “Port Information for the local system” (page 182)
NOTE: DKC is an acronym for disk controller, which controls an entire system. Cnt Ac-J Z windows
use the term "DKC" to indicate a system.
LDKC is an acronym for logical disk controller, and it also may be called logical DKC. LDKC is a
controller that controls a logical system that exists in P9500. In the Cnt Ac-J Z window, the term
“LDKC” indicates a logical system.
Information on the DKC Operation window is updated when you do one of the following:
•
Click File > Refresh on the menu bar.
•
Click Apply
•
Select another tab and then reselect the DKC Operation tab.
•
Close the DKC Status window.
•
Select Modify mode when you are in View mode.
DKC Operation window 179